How to root Android - Framaroot for One Click Root

When it comes to rooting there are various methods to do it. But the outcome would be the same. Either you will have a fully functional rooted smartphone or a tablet or you will have an expensive paperweight which is your bricked smartphone. So you have to pick the most suitable and efficient Android rooting tool from all of out there. We talked about Kingo root and CF auto root on previous articles. Today we are gonna talk about Framaroot which is also a one of the best.

If you like to start with the little steps click here for beginners guide on Android rooting - https://odindownload.com/root-android/

What is Framaroot

It is a wonderful creation of the senior XDA developer Alephzain. There is not a universal method to root all kind of Android devices. But this tool considers the universal Android rooting tool. The reason is its capableness. You just have to use a single click and it will be directly rooted. There are a few exploits attached in one tool kit. You have to check the list of compatible devices first. But mainly the process depends on the firmware version that your smartphone or the tablet holding. The interesting fact is this root tool is quiet impressive for Lord of the ring fans because the exploits are named after that.

How to Root Android

• Check the compatible list and found the correct version.
• Go to its official webpage and download the accurate version to a PC.
• Now connect the device with the PC using a USB cable.
• Place the downloaded APK in the SD card of the mobile device.
• Then disconnect it from the USB cable.
• Now go to Menu --> Settings --> Security --> unknown sources --> enable it.
• Then find the Framaroot APK from the file manager.
• Next, you just have to install it like any other regular application.
• Launch the application.
• From the first drop-down menu find the SuperSU and install it.
• Now select the suitable exploit for your device and Android rooting will be started.
• Do not forget to reboot once the process is finished.

Wrap Up

The thing that you should remember is if you update the device after the rooting Framaroot could not perform a rooting process again on your device. Because once it updates it will be fixed all the exploits by covering up. So rooting become impossible. And another important fact is when you first perform root with Gandalf exploit it can be crash the Framaroot. But it's normal. All you have to do is relaunch it and select the exploit again. Then it will be work just fine.

How to root android - CF auto root for any smartphone or tablet

With this series of articles about android rooting, we reached to the third article with this one. So today I'm going to talk about some interesting and powerful third party tool which was developed by the famous hacker and XDA developer named Chainfire. This tool is compatible with more than 300 brands and models of Android smartphones and tablets. But working with it seems a little bit difficult but it's efficient.

If you like to find a little bit more about all this you can click right here before reading this article.

Before Android rooting

• You should backup all the important data of the smartphone or the tablet you are intending unlock. Otherwise, there is a huge risk to a loss in all of them.
• If you want to root a Samsung device you should have a windows computer. Because the drivers are only available for the Windows. But for any other brand beside Samsung, you can use any platform such as Windows, Mac or the Linux.
• When it comes to downloading the right root tool package it's a bit tricky. You should be careful and match the model number, brand and the android version with the rooting package that you are going to download.
• Then download it by visiting this page. Then extract it into a folder located in the hard drive and remember it. Because we need it later.

how to root android

There is mainly 2 method for this rooting process. If you are rooting a Samsung device there is a different method that does it by using Odin. Here you can find both.

Android rooting for Samsung devices

• First, turn off the device. Put it into the download mode by press and hold the home button, power button and volume down button simultaneously. Continue the process by using volume buttons.

• Connect the smartphone or the tablet with the PC using a USB cable.
• Go to the folder that has extracted the content of the downloaded tool kit. 
• Find the .exe ODIN file and run it as an Administatrter.
• Now it will recognize the device that was been connected.
• Once it does In the interface  "ID:COM" field should be turned to blue.
• Click the AP button and the rest should be unchanged.
• Navigate the folder that contains the extracted tool kit again and opens the CF-Auto-Root.rar.md5 file.
• When the log tab displays a message saying "Leave CS" click the start. 
• With this step, the root Android process will be started.
• Finally, it will be reboot automatically once it finished its job.

Root Android For all the other devices

• Turn off the smartphone or the tablet you are rooting. Press and hold the power button and volume button simultaneously.
• When the bootloader mode on connecting it with the computer by USB cable.
• Go to the folder that has extracted tools of CF Auto root.
• Find the compatible file to your operating system of the computer and double click it to run.
• Now the rooting process will begin.
• The CMD will inform you that bootloader is going to unlock. To continue the process press any key.
• The red android logo will be displayed on the device screen while this process happening.

• After it completes its job the device will be rebooted again.

Wrap Up
Make sure to select accurate root tool except you would want to end up with a bricked device. And also this will void your device warranty. You can read my previous article if you like here.

How to root Android with Kingo Root Solution

If we want to learn how to swim we have to get into water no matter how much knowledge you have theoretically. So even if we have tons of knowledge about rooting it does not give you a rooted device. That's why you have to try it. Today I'm going to tell you how to android root with Kingo. It is a compatible and powerful tool that can be used over more than hundreds of mobile models such as LG, Samsung, Sony and android versions above Android 4.0.

If you are new read the previous article and come back. 

Root Android with APK

• Grab the smartphone or the tablet you intend to root and allow download from unknown sources. Otherwise, you won't download the application.
• To do this Go to General Settings --> Security --> Unknown Sources. 
• To go to the pages that are downloads available you have to type kingoapp.com in the search bar of the browser.
• You will be able to see two buttons for windows and Android.
• Click the one for android because here we are going for the direct rooting method.
• Now install the downloaded APK like a common app.
• Launch the application by clicking the icon.
• Click the  "One Click Root" button.

• It will start the rooting process.
• With a few seconds, the rooting process will be finished.
• Wait until the result will appear.
• There is a possibility to failed the first attempt.
• So try a few times before giving up.
• If you success viola... you got a rooted android smartphone or a tablet.
• If not, don't worry, we can try the PC method.

Root Android with Windows version

• Windows is the only compatible platform. So make sure to use a one to do the process.
• Go to the official website which is kingoapp.com
• Click the version that is issued for windows within the two buttons.
• The application will be downloaded to PC
• It's just an application just like regular ones. So download it.
• Double click on the desktop icon and launch the app.
• Connect the device with the computer using a USB cable.
• Kingo will download necessary drivers so make sure to have a stable internet connection.
• Enable USB debugging mode on your device by General --> settings --> about --> build number --> Tap 5 times --> you are a developer now --> settings --> developer option --> USB debugging mode --> Enable
• Tick "Always allow from this computer" from the mobile device.
• After the device would detect by the PC application you will see a button for Root.
• Click the button.
• Android rooting will start right away.
• The device will be rebooted after the process finished.
• Usually if it a successful process SuperSu will be downloaded.

Final verdict
Always the first experience would be a terrifying one. Root Android is the same. But after the process, you will understand that there is nothing to worry. But if you do not want to worry you have to be cautious in the process. Otherwise, there is a high possibility that you end up with a bricked device.

How to root Android

If Android technology is an ocean we only know teaspoon about. There are a lot more to learn. But if you want to become a Pro all you have to do is start from somewhere. Do not forget that that so-called Pross' also begins their journey as a noob. So in this article, I am going to talk about basic and fundamental facts about rooting Android that you should know by now.

What is Android Rooting?

This is a very complicated process. You might only see the peak of the iceberg of it. Because it simplifies by the third-party apps that allow you to do it by just one click. Anyhow, this is the process that allows you to attain privileged access over the internal system of a smartphone or a tablet. What is the meaning of privileged access? When you attain it you are no longer bound to obey the limits and boundaries that have been imposed by the manufacturers. This process will offer you many opportunities but on the other hand, there is a grave risk also.

Why you should Root Android?

• Clear all the junks and bloatware piled up inside your device. This will free up a lot of memory and it will cause a smooth running.
• To flash custom ROMs and get more customizing
• To download amazing rooting apps like Greenify and Titanium Backup
• Block all the pop-ups and advertisements running inside the system.
• To get full backups.
• To enhance overall performance and speed.

Why You should not root Android?

• It will void the warranty. You have to take the responsibility whatever happened to your device.
• The device becomes vulnerable to malware, viruses, and spyware.
• There can be a situation that the system does not function properly after rooting
• In the worst case, there is a possibility to brick the device.

Wrap Up

As you understand by now its, not a simple task tp root android. You have to do a lot of researches on it. After that make sure to select a proper root tool compatible with the smartphone or the tablet you have. Let's talk about this furthermore in future articles.

Welcome to My Blog

The implementation of the technology is becoming more and more advanced each day. We must e make sure to not to left behind and walk with it. There are tons of things that you might do not know even existed in these technologies. Android is a good example. So I hope to discuss everything related to that particular topic in here. Keep in touch with me to keep in touch with Android and do not left behind. Thanks for stopping by.